Analogue Output

The C-Bus 0 -10V Analogue Output is a C-Bus output unit which provides analogue voltage control signals to drive most types of 0 - 10V electronic dimmable ballasts used in the lighting industry.

The Analogue Output unit operates in response to commands from C-Bus input units such as; Key Input Units, PIR Occupancy Sensors and Light Level Sensors and can respond to as many as six C-Bus ‘Group Addresses’. The output terminals can be assigned to any combination of these addresses facilitating multiple output control; for instance, from a single message command.

The four analogue outputs are provided for independent control of up to four devices, with a common reference connection. The C-Bus Installation Software is used to configure the device. Communication with other C-Bus devices and the supply voltage is obtained via a single C-Bus twisted pair cable.

In the event of a power failure, an inbuilt non-volatile memory retains programmed information relating to the current operating status of the unit. Electrical isolation between the safe extra low voltage C-Bus side and the Analogue Output is provided to maintain safety requirements.